Denon S-301 Bedienungsanleitung Seite 55

System Setup
3 When "HDMI AUDIO OUT" is selected:
CURSOR •
ª
Press the or button to select the
desired setting item, then press the
-4
button.
OFF (Factory default):
The audio signals are not output via the HDMI connector.
ON:
The audio signals are output via the HDMI connector.
4 When "TV TYPE" is selected:
CURSOR •
ª
Press the or button to select the
desired setting item, then press the
button.
NTSC:
Select this when your TV's video format is NTSC.
If NTSC is selected, output format is fixed to NTSC.
PAL (Factory default):
Select this when your TV's video format is PAL.
If PAL is selected, output format is fixed to PAL.
MULTI:
Select this when your TV is compatible with both the NTSC
and PAL formats.
NTSC signals are output from the video output terminals
when discs recorded in NTSC format are played, and PAL
signals are output from the video output terminals when discs
recorded in PAL format are played.
5 When "PLAYER MODE" is selected:
CURSOR •
Press the
ENTER
desired setting item, then press the
button.
AUDIO (Factory default):
Set this to play the DVD audio signals as such.
VIDEO:
Set this to play the DVD video contents included on a DVD
audio disc.
6 When "PROGRESSIVE MODE" is selected:
CURSOR •
Press the
desired setting item, then press the
ENTER
button.
AUTO1 (Factory default):
Select this when the image recorded to the DVD is film
material.
AUTO2:
Select this when the image recorded to the DVD is 30-frame
film material.
VIDEO1:
Select this for regular video material.
VIDEO2:
Select this for video material having little movement.
VIDEO3:
Select this for video material having a lot of movement.
ENGLISH
7
ª
or button to select the
ENTER
OFF (Factory default):
Select this to display as full size of a 16:9 TV ,regardless of the
image's size.
ON:
Select this to display the image with a ratio of 4:3 at the
center of a 16:9 TV, regardless of the image's size.
ª
or button to select the
This can only be selected when the slide switch on the main
ENTER
unit's rear panel is set to "WIDE (16:9)".
No effective for interlaced image.
8
VIDEO (Factory default):
Composite video signals will be output from the AV1 SCART
terminal.
RGB:
RGB signals will be output.
9
50
When "SQUEEZE MODE" is selected:
CURSOR •
ª
Press the or button to select the
desired setting item, then press the
button.
When "AV1 VIDEO OUT" is selected:
CURSOR •
ª
Press the or button to select the
desired setting item, then press the
button.
CURSOR ª
Press the button to select "NEXT
ENTER
SETUP MENU", then press the
to enter the setting.
• The next screen in the "SETUP" menu screen appears.
ENGLISH
System Setup
ENTER
ENTER
button