System Setup Items And Default Values (Set Upon Shipment From The Factory) - Denon S-301 Bedienungsanleitung

ENGLISH
System Setup

System setup items and default values (set upon shipment from the factory)

OSD LANGUAGE
DIALOG
LANGUAGE
SETUP
SUBTITLE
DISC MENUS
HDMI SETUP
TV TYPE
PLAYER MODE
VIDEO
SETUP
PROGRESSIVE MODE
SQUEEZE MODE
AV1 VIDEO OUT
SPEAKER SETUP
AUDIO
INPUT MODE
SETUP
DIGITAL OUT
LPCM (44.1 kHz/48 kHz)
SACD LAYER
COMPRESSION
AUDIO DELAY
Setup items
Set the OSD setup display language for modes other than playback
and pause.
Set the language of the sound output from the speakers.
Set the language of the subtitles displayed on the TV.
Set the language of the menus recorded on the disc (top menu, etc.).
Use this to select the video signal output from the HDMI connector,
to choose the format of the video output signal and to switch the
digital RGB video range.
Set your TV's video format (NTSC, PAL or MULTI).
Use this to play the DVD video contents included on a DVD audio disc.
Set the progressive mode (AUTO1, AUTO2, VIDEO1, VIDEO2,
VIDEO3).
Set the size of the screen to be output.
To select whether composite video signals or RGB signals will be
output from the AV1 SCART terminals.
At the listening position, listen to the test tones
CHANNEL
output from the different speakers and set so that the
LEVEL
playback level from the different speakers is equal.
This parameter is for optimizing the timing with which
DISTANCE the audio signals are produced from the speakers and
subwoofer according to the listening position.
SPEAKER To achieve the best acoustics, set the location of the
LOCATION speakers and the conditions in the room.
When DVD or AUX was selected as the input function, use this to
select the input mode.
Use this to select the digital output's signal format.
Use this to set the digital audio output when playing DVDs recorded
in linear PCM audio.
Use this to switch the area /layer of the Super audio CDs played with
priory.
Use this to adjusts the dynamic range of the Dolby Digital or DTS
sound.
Use this to synchronize the sound and video.
Default settings
ENGLISH
ENGLISH
OFF
ENGLISH
HDMI AUTO
HDMI SELECT
FORMAT
Y Cb Cr
PANEL RES.
PAL
AUDIO
AUTO1
OFF
VIDEO
TEST TONE FRONT LCH
OFF 0 dB
FRONT FRONT
DISTANCE
LCH RCH
METERS 2.7m 2.7m
LOCATION
2:ON SHELF
AUTO
NORMAL
OFF
STEREO
OFF
0 mSEC
61
ENGLISH
Page
47
47
47
47
HDMI BLACK HDMI AUDIO
LEVEL OUT 49, 50
NORMAL OFF
50
50
50
50
50
FRONT RCH SUBWOOFER
53
0 dB 0 dB
SUBWOOFER DEFAULT
54
2.7m ON
ROOM DAMPING
54, 55
MID
51
51
52
52
52
52
System Setup