Setting Up The System - Denon DHT-M330DV Bedienungsanleitung

8 SETTING UP THE SYSTEM

(1) Quick setup procedure
• Generally used system settings have already been made on the DHT-M330DV upon shipment from the factory, so the DHT-M330DV can be
used as such if there is no need to make changes to the system.
• In the cases described below, use the Quick Setup function to make the system settings before using the DHT-M330DV.
q When expanding the system configuration to a 6.1- or 7.1-channel system (see page 13, 47, 48)
w When installing the speakers in a large room (select at "ROOM SETUP" below)
e When setting the TAPE function to the TV/AUX1 function and connecting both the digital and analog inputs (set "FUNC. SETUP" below to
"TV/AUX1").
Speaker
Select the speaker configuration you
configuration
plan to use.
SPEAKER SETUP
Room settings
Select the speaker installation space.
ROOM SETUP
Select the TAPE or MD function
(analog input/output connectors only)
Function settings
or the TV/AUX1 function (analog
FUNC. SETUP
input/output connectors and digital
input connectors).
Quick Setup procedure
1
1 Turn off the power.
• The standby mode is set and the power indicator turns red.
Red
Main unit
2 Press the MENU/SET button for at least
2 seconds.
• The display lights and "QUICK
SETUP" is displayed.
Quick system settings
Setup
2, 3 4
Remote control unit
Main unit
Settings <>: Display
<5.1CH>
2 front channels
2 front channels
Center channel
Center channel
2 surround channels
2 surround channels
Surround back channel
Subwoofer channel
Subwoofer channel
S (3.6X4.5)
Equivalent to 3.6 x 4.5 Equivalent to 4.5 x 5.4
meters
<TAPE>
Use
Use as analog
input/output connector input/output connector
TAPE function.
MD function.
3 The items you want to set are displayed
each time the MENU/SET button is
pressed (for less than 1 second).
• The item changes each time the
button is pressed, as follows:
SPEAKER SETUP
FUNC.SETUP
• After one second, the currently set
value is displayed.
4 Use the select
to set.
• If you do not want to change the value, press the
MENU/SET button to continue.
5 After going once through pressing the
MENU/SET button, the DHT-M330DV is
set back to the standby mode.
:Factory default
<6.1CH> <7.1CH>
2 front channels
Center channel
2 surround channels
2 surround back channels
Subwoofer channel
M (4.5X5.4) L (6.0X6.0)
Equivalent to 6.0 x 6.0
meters meters
<MD> <TV/AUX1>
Use analog input/output
as analog
connectors (TAPE) and
digital input connector
(TV/AUX1)
TV/AUX1 function.
1
ROOM SETUP
(END)
0 and 1 buttons to select the item you want
Main unit
ENGLISH
as the
Main unit
27