Setting "Audio Setup - Denon S-301 Bedienungsanleitung

ENGLISH
System Setup

Setting "AUDIO SETUP"

1
CURSOR
Press the 0 or 1 button to select
"AUDIO SETUP" icon, then press the
button.
• The "AUDIO SETUP" menu screen appears.
2
CURSOR •
Press the or
desired setting item, then press the
button.
SPEAKER SETUP:
"CHANNEL LEVEL" ( page 53), "DISTANCE" (
54) and "SPEAKER LOCATION" (
INPUT MODE:
When DVD or AUX was selected as the input function, use
this to select the input mode.
DIGITAL OUT:
Use this to select the digital output's signal format.
LPCM (44.1 kHz / 48 kHz):
Use this to set the digital audio output when playing DVDs
recorded in linear PCM audio.
SACD LAYER:
Use this to switch the area / layer of the Super audio CDs
played with priory.
COMPRESSION:
Use this to adjusts the dynamic range of the Dolby Digital or
DTS sound.
AUDIO DELAY:
Use this to synchronize the sound and video.
3 When "INPUT MODE" is selected:
Press the
desired setting item, then press the
-1
ENTER
button.
AUTO (Factory default):
In this mode, the type of signal being input to the digital and
analog input terminals is detected and the program in the
set's surround decoder is switched automatically to play the
signals for the selected input function.
The presence or absence of digital signals is detected, the
signals input to the digital input are identified and decoding
and playback are performed automatically in DTS, Dolby
ª
button to select the
Digital or PCM (2 channel stereo) format.
ENTER
If no digital signal is being input, the analog input terminals are
selected.
Use this mode to play Dolby Digital signals.
page DTS:
page 54, 55) can be set. Decoding and playback are only performed when DTS signals
are being input.
PCM:
Decoding and playback are only performed when PCM signals
are being input.
ANALOG:
The signals input to the analog input terminals are played.
(This cannot be selected in the DVD mode.)
Different input modes can be selected for each input
function. The selected input mode is stored in the memory
for the individual input functions.
When the input function is set to something other than the
above, "ANALOG ONLY" is displayed and the input mode
cannot be selected.
The input mode automatically switches to "AUTO" if you
switch the input function to DVD from anything other than
DVD.
CURSOR •
ª
or button to select the
ENTER
51
ENGLISH
3 When "DIGITAL OUT" is selected:
CURSOR •
ª
Press the or button to select the
desired setting item, then press the
-2
button.
NORMAL (Factory default):
Make the selection when playing back in surround playback a
DVD that has been recorded with Dolby Digital or DTS on this
unit.
The Dolby Digital or DTS digital signal is also output from the
digital output terminals.
PCM:
DVDs that were recorded in Dolby Digital or DTS are
converted to linear PCM 48 kHz/16 bit (2 channels). Make the
selection when making a digital recording.
System Setup
ENTER