Herunterladen Inhalt Inhalt Diese Seite drucken

After Changing The System Settings - Denon S-101 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 70
System Setup
3
CURSOR •
Press the
or
ª
"ENABLE".
DISABLE (Factory default):
Set this to disable the "ONCE TIMER" or "EVERY TIMER"
function that has been set.
ENABLE:
Set this to enable the "ONCE TIMER" or "EVERY TIMER"
function that has been set.
4
CURSOR •
Press the
ª
, 0 or 1 button to
,
select start time, end time, and function, then
ENTER
press the
button.
When "TUNER" is selected, the preset frequency can also
be selected.
Example:
Listening to P01 (FM 92.5 MHz) from "12:35" to
"12:56" using the "EVERY TIMER".
5
CURSOR •
ª
Press the
or
"EXIT SETUP", then press the
• The timer is turned on and the timer standby indicator
lights. This completes the setting of the timer.
6
ON/STANDBY
Press the
switch.
• The standby mode is set.
(The power indicator turns yellow.)
When the timer start time is reached, the timer operates.
• To exit the once timer or every timer set mode:
Press the RETURN button, you can go back to the previous
screen.
2 Checking the timer settings
button to select
1
Press the
screen.
2
Press the
"SETUP", then press the
3
Press the
"TIMER SETUP", then press the
button.
• Press the STATUS button in the standby mode to show on the
S-101's display whether the timer is turned on or off.
Example:
When the "ONCE TIMER" is on and the "EVERY TIMER" is
off
2 Sleep timer, every timer and once timer
priority
If the times set for the sleep timer, every timer and once timer
overlap, the priority is as follows:
button to select
every timer → once timer → sleep timer
ENTER
button.
2 Changing the timer settings
Reset the timer from the start using the desired settings.
The new settings overwrite the previous settings.
2 Quitting the timer setting
(turning the operation of the timer off)
Select "DISABLE" at the "ONCE TIMER" or "EVERY TIMER"
setting screen.
HELP
button to display the help
CURSOR •
or
ª
button to select
ENTER
button.
CURSOR
0 or 1 button to select
ENTER
1 on/Eoff
54
ENGLISH
2 If there is a power failure
• If there is a power failure or the power supply cord is unplugged
from the power outlet, the time display flashes when the
power comes back on. Reset the current time.
• The once timer settings are deleted. Remake the settings.
• If the everyday timer settings and the tuner presettings have
been deleted, reset them.

After changing the system settings

• This completes the procedure for changing the system
settings. Once the channel levels, distances and speaker
location have been set, there is no need to change the settings
again unless the connected AV components or speakers are
changed or the speakers are moved to different positions.
• DVD auto power off as necessary.
At the "SETUP" menu screen, press the
button.
• The new settings are entered and the on-screen display turns
off.
The setup procedure can be quit at any point by pressing
this button.
ENGLISH
System Setup
HELP

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis