Setting "Video Setup; Setting "Audio Setup - Denon S-101 Bedienungsanleitung

ENGLISH
System Setup

Setting "VIDEO SETUP"

1
CURSOR
Press the 0 or 1 button to select
"VIDEO SETUP" icon, then press the
button.
• The "VIDEO SETUP" menu screen appears.
2
CURSOR •
Press the or
desired setting item, then press the
button.
TV TYPE:
Use this to set your TV's video format (NTSC, PAL or MULTI).
PROGRESSIVE MODE:
Use this to select the progressive mode (AUTO, FILM or
VIDEO).
3
When "TV TYPE" is selected:
CURSOR •
Press the or
-1 desired setting item, then press the
button.
NTSC:
Select this when your TV's video format is NTSC.
If NTSC is selected, output format is fixed to NTSC.
ENTER
PAL (Factory default):
Select this when your TV's video format is PAL.
If PAL is selected, output format is fixed to PAL.
MULTI:
Select this when your TV is compatible with both the NTSC
and PAL formats.
NTSC signals are output from the video output terminals
when discs recorded in NTSC format are played, and PAL
signals are output from the video output terminals when discs
recorded in PAL format are played.
3 When "PROGRESSIVE MODE" is selected:
Press the
desired setting item, then press the
-2
button.
ª
button to select the
ENTER
AUTO (Factory default):
The mode is selected by identifying the type of material (film
or video flag) from the disc.
FILM:
The setting is suited for playing film material discs or video
ª button to select the
material discs recorded with progressive scanning.
ENTER
VIDEO:
The setting is suited for playing video material discs.
4
Press the
SETUP MENU", then press the
to enter the setting.
• The next screen in the "SETUP" menu screen appears.
CURSOR •
or ª button to select the
ENTER
CURSOR ª
button to select "NEXT
ENTER
button
45
ENGLISH

Setting "AUDIO SETUP"

1
CURSOR
Press the 0 or 1 button to select
"AUDIO SETUP" icon, then press the
button.
• The "AUDIO SETUP" menu screen appears.
2
CURSOR •
ª
Press the or button to select the
desired setting item, then press the
button.
SPEAKER SETUP:
"CHANNEL LEVEL" ( page 47), "DISTANCE" (
48) and "SPEAKER LOCATION" ( page 49) can be set.
INPUT MODE:
When DVD or AUX was selected as the input function, use
this to select the input mode.
DIGITAL OUT:
Use this to select the digital output's signal format.
LPCM (44.1 kHz / 48 kHz):
Use this to set the digital audio output when playing DVDs
recorded in linear PCM audio.
COMPRESSION:
Use this to adjusts the dynamic range of the Dolby Digital or
DTS sound.
AUDIO DELAY:
Use this to synchronize the sound and video.
System Setup
ENTER
ENTER
page