Access To Mini-Joystick And Osd Setting; Lens Setting - Santec VTC-262HWD Bedienungsanleitung

Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW,
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD

3.3 Access to mini-joystick and OSD setting

All camera adjustments are done via an OSD menu using a mini-joystick. Access the mini-
joystick as follows (also see pictures 1 and 2):
Open the housing by carefully turning it counter-clockwise.
On the camera, you will fin a mini-joystick for OSD settings and the additional video
connection. Press onto the joystick and a menu pops up in the video picture. You can now
move the joystick left/right/up/down in order to get to the desired menu item. For confirming
your choice, press onto the joystick.
See chapter 8 for „Camera settings via OSD menu".
Once all settings are made, carefully close the housing again by turning it clockwise.
Finally, clean the camera dome to remove fingerprints and other stains.

3.4 Lens setting

To achieve the correct angle of view, turn the zoom ring until you get from a wide angle to a
near angle or vice versa. Use the second ring to adjust the sharpness. See picture 3.
_________________________________________________________________________________
- 51 -