Exposure; Day/Night; White Balance - Santec VTC-262HWD Bedienungsanleitung

Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW,
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD

8.2 Exposure

Here you can make the following adjustments for ALC and ELC mode:
Lens: ALC or ELC
Brightness: 0 to 20
Shutter: Auto, 1/50 to 1/120.000
FLK: Image flickering: On, off
AGC: Automatic gain control: On, off
Sense up: Off, 2x to 1024x. The camera automatically detects the light level and
creates a sharp picture. If enabled, you can adjust the shutter speed (2x to 1024x).
The higher the value, the more likely you will achieve a clear picture but noise may
occur.
Return

8.3 Day/night

Auto: The image (day/night function) automatically adjusts to the surrounding
brightness. Here you can make the following adjustments:
o Mode
o AGC threshold
o AGC margin
o D/N delay
o B/W burst
o Smart IR
Day: Permanent day mode (colour mode).
Night: Permanent night mode (black/white mode). Here you can make the following
adjustments:
o Mode
o B/W burst
o Smart IR
External:
o Mode
o External B/W
o D/N delay
o B/W burst
o Smart IR

8.4 White balance

ATW: Automatic white balance
Push
Manual: Setting the red and blue values.
_________________________________________________________________________________
- 79 -