Vtc-369Irhg, Vtc-369Irhw; Items Included In The Delivery; Camera Overview - Santec VTC-262HWD Bedienungsanleitung

5. VTC-369IRHG, VTC-369IRHW

5.1 Items included in the delivery

1x Camera
1x Adapter: Plug/screw connector
1x Adapter: BNC socket
1x Focus adjuster
1x User manual

5.2 Camera overview

Open housing ring
Focus adjustment
Additional video connection (via
adapter), e.g. for monitor
connection during installation
phase
Mounting:
1. Loosen the safety screw at the housing ring.
2. Carefully twist the housing ring off the mounting ring.
3. Use suitable screws to fix the mounting ring in the desired position (wall or ceiling).
4. Put the camera ball into the ball cup and attach them to the mounting ring using the
housing ring. Don't tighten it too much but ensure that the camera ball is still free to
move so that you can adjust the lens (see chapter 5.4).
5. Connect the video and power cables.
6. Only after the lens adjustment has been made, seize tight the housing ring to the
mounting ring (see chapter 1.2).
_________________________________________________________________________________
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
Mounting ring
Mini-joystick for
OSD setting
- 60 -
Bedienungsanleitung / User manual
Close housing ring
Ball cup
Camera ball
Removable cover
for service access
IR-LED adjustment:
It is possible to switch off
the IR-LED completely so
that the camera can also be
operated without IR
illumination.