Inhaltsverzeichnis
Werbung
C
3.
ontrol panel mounting
3.1 External dimensions in mm
Panel cutout in mm
3.2
＋0.8
92
0
Mounting the unit
3.3
Mount the instrument vertically to the flat, rigid panel to ensure it adheres to the ingress protection (IP66).
Mountable panel thickness: 1 to 8 mm
(1) Insert the instrument from the front side of the control panel.
(2) Attach the mounting brackets by the slots on the right and left sides of the case, and secure the instrument in place
with the screws.
Caution
As the case of the DI25 is made of resin, do not use excessive force while tightening screws, or the mounting
brackets or case could be damaged. 0.12 Nm of torque is recommended.
96
106.2
130
Gasket
11.5
(Fig. 3.2-1)
Vertical close mounting
n: Number of mounted units
for the instrument, IP66 may be compromised,
＋0.8
and all warranties will be invalidated.
92
0
(Fig. 3.3-1)
(Fig. 3.4-1)
8
98.5
104.5(*)
(*) When terminal cover is used
Caution: If vertical close mounting is used
Terminal cover
Werbung
Inhaltsverzeichnis
