WIKA DI25 Betriebsanleitung Seite 16

Character factory default Setting item, function, setting range
A3 hysteresis
• Sets A3 hysteresis.
• Not available if no alarm action or high/low limit range alarm is selected in
[A3 type].
• Setting range: 0.1 to 100.0
DC current, DC voltage input: 1 to 1000 (the placement of the decimal
point follows the selection.)
A1 delay time
• Sets A1 action delay time.
When setting time has elapsed after the input enters the alarm output
range, the alarm is activated. Not available if No alarm action is selected
in [A1 type].
• Setting range: 0 to 9999 seconds
A2 delay time
• Sets A2 action delay time.
When setting time has elapsed after the input enters the alarm output
range, the alarm is activated.
• Not available if no alarm action is selected in [A2 type].
Not available if the insulated power output (P24 option) is ordered.
• Setting range: 0 to 9999 seconds
A3 delay time
• Sets A3 action delay time.
When setting time has elapsed after the input enters the alarm output
range, the alarm is activated.
• Not available if no alarm action or high/low limit range alarm is selected in
[A3 type].
• Setting range: 0 to 9999 seconds
Transmission output 1 high limit
• Sets the transmission output 1 high limit value.
Standard
4-20 mA DC
Optional
0-20 mA DC
0-1 V DC
0-5 V DC, 1-5V DC
0-10 V DC
• Setting range: transmission output 1 low limit to Input range high limit (the
placement of the decimal point follows the selection or input range.)
Transmission output 1 low limit
• Sets the transmission output 1 low limit value.
Standard
4-20 mA DC
Optional
0-20 mA DC
0-1 V DC, 0-5 V DC,
0-10 V DC
1-5 V DC
• Setting range: input range low limit to transmission output 1 high limit (the
placement of the decimal point follows the selection or input range.)
16
( )
Equals 20 mA DC output.
Equals 20 mA DC output.
Equals 1 V DC output.
Equals 5 V DC output.
Equals 10 V DC output.
Equals 4 mA DC output.
Equals 0 mA DC output.
Equals 0 V DC output.
Equals 1 V DC output.