Inhaltsverzeichnis
Werbung
Character factory default
Setting item, function, setting range
Scaling high limit
• Sets scaling high limit value.
• Available when DC current or DC voltage input is selected in [Input type].
• Setting range: Scaling low limit to Input range high limit (the placement
of the decimal point follows the selection or input range.)
Scaling low limit
• Sets scaling low limit value.
• Available when DC current or DC voltage input is selected in [Input type].
• Setting range: Input range low limit to scaling high limit (the placement of
the decimal point follows the selection or input range.)
Decimal point place
• Selects decimal point place.
• Available when direct current or DC voltage input is selected in [Input
type].
: No decimal point
: 1 digit after decimal point
: 2 digits after decimal point
: 3 digits after decimal point
PV filter time constant
• Sets PV filter time constant. If the value is set too large, it affects alarm
action due to the delay of response.
• Setting range: 0.0 to 10.0 sec
A1 type
• Selects an A1 type. See section 7.1 (p.20).
• If A1 type is changed, A1 value will default to 0 (0.0).
•
: No alarm action
: High limit alarm
: Low limit alarm
: High limit with standby alarm
: Low limit with standby alarm
A2 type
• Selects an A2 type. See section 7.1 (p.20).
• Not available when insulated power output (P24 option) is ordered.
• If A2 type is changed, A2 value will default to 0 (0.0).
•
: No alarm action
: High limit alarm
: Low limit alarm
: High limit with standby alarm
: Low limit with standby alarm
A3 type
• Selects an A3 type. See section 7.1 (p.20).
• If A3 type is changed, A3 value will default to 0 (0.0).
•
: No alarm action
: High limit alarm
: Low limit alarm
: High limit with standby alarm
: Low limit with standby alarm
: High/Low limit range alarm [See Section 7.2 (p.21).]
14
Werbung
Inhaltsverzeichnis
