Inhaltsverzeichnis
Werbung
Kapitel 7 – Rechnergesteuerter Betrieb
7.4.2
ü
BertrAgungSBefehle
Command
Code
Channel 1
*IDN?
OD1
OB
Command
Code
Channel 2
*IDN?
Returns Magtrol Identification
and software revision.
OD2
Prompts to return speed-
torque-direction data string.
OB
Output Binary Data
72
Magtrol DSP7000-Leistungsbremsen-Controller
Function
Output Data prompt to return
data string with this format:
R or L is the shaft direction
indicator, as viewed looking at
the dynamometer shaft where:
R = right; clockwise (CW)
L = left; counterclockwise
A = alarm condition
The speed will equal the
displayed value and the torque
will be in the same units as
displayed on the front
Please see section 7.2.2 for
details
Explanation
SxxxxxxTxxxxxRcrlf
or
SxxxxxxTxxxxxLcrlf
or
SxxxxxxTxxxxxAcrlf
(CCW)
panel.
Werbung
Inhaltsverzeichnis
