Assembling The Unit - Stihl SE 61 Gebrauchsanleitung

Assembling the Unit

Various accessory parts must be
mounted on the machines before
starting for the first time.
Do not plug the power cord into
the outlet until the machine is
completely assembled.
N
Release the spring catches (1)
N
Lift the upper part of the vacuum
cleaner (2) vertically up and off
N
Remove the accessories from the
container
SE 61, SE 61 E
N
Fit filter bag
N
Push filter bag sleeve onto intake
port as far as possible (see
instructions on filter bag)
N
Refit the upper part of the vacuum
cleaner (2) and close the spring
catches (1) – ensure that the
catches engage properly
N
Insert suction hose (5) in the intake
port (6)
N
Insert suction hose (7) in the sleeve
of the hand tube (8)
N
Lock ring (9) on hand tube
To connect other tools (e. g., grinding
machine):
N
Fit adapter for power tools (10)
(supplied with the model SE 61 E)
to suction hose instead of hand tube
N
Slide the extension tube holder (3)
along the extension tube (distance
A approx. 13 cm) and clamp it down
with the screw (4)
N
Fit second extension tube to the
other end
N
Depending on the intended use of
vacuum cleaner – select the
appropriate accessory and fit to
lower end of extension tube
English
23