Assembling The Unit - Stihl SE 62 Gebrauchsanleitung

English

Assembling the Unit

The following accessory parts must be
fitted before using the machine for the
first time.
WARNING
Do not plug the power cord into the
outlet until the machine is completely
assembled.
Opening and closing the container
1 1
Opening
Release the spring catches (1)
N
Lift the upper part of the vacuum
N
cleaner (2) vertically up and off
Remove accessories and insert
N
filter bag – see "Inserting filter bag"
Closing
Refit the upper part of the vacuum
N
cleaner (2) and close the latches (1)
– ensure that the latches engage
properly
26
Fit filter bag
Push filter bag sleeve onto intake
N
port as far as possible
Mount suction hose and hand tube
1
Insert sleeve (1) of suction hose into
N
the intake port (2)
Slide clutch (3) of suction hose into
N
the retainer (4) on the hand tube –
lock (5) must engage
When using the adapter for electric
power tools (supplied with the model SE
62 E):
Slide clutch (3) of suction hose into
N
the retainer (6) of the adapter for
electric power tools – lock (5) must
engage
Holders for power cord
SE 62
1
Connect holder for power cord via
N
the support on the upper part of the
vacuum cleaner
SE 62 E
4
3
5
6
Attach holder for power cord on the
N
right tab on the upper part of the
vacuum cleaner
SE 62, SE 62 E