Sharp PG-M15X Serviceanleitung Seite 27

3. DMD Type Setting Sop
1. Record type of DMD chip (An English letter in
capital) before assembly.
2. Select "DMD" on the process mode screen.
2-1. Turn on the power. Press the ON/OFF button on the
projector or the POWER button on the remote controller.
2-2. Make sure the message "Turn Power OFF?" on the
screen. With this message still onscreen, press the
buttons in this order: "'", "'", """ and """ on the
remote controller, or "+", "+", "-" and "-" on the projector.
2-3. Be sure the process adjustment menu appears on
the screen, and select DMD.
2-2
2-1
RemoteController
2-2
2-1
Projector
3. Choose "DMD Bin" to do setting.
4. Use "+" and "-" keys on Keypad to choose DMD
type same as the type of new one
5. Press "Enter" key and then Press "MENU" key to go
back to the original image.
Note: Be sure to make this DMD Type Setting to keep up the
DMD chip reliability.
27
PG-M15X
PG-M15S
AN-M15T