Sharp PG-M15X Serviceanleitung Seite 16

PG-M15X
PG-M15S
AN-M15T
2-5. Remove one screw of DC to DC PWB Unit Holder, unplug three Connecting Cords, and then detach DC to
DC PWB Unit.
(Step 12,13.)
2-6. Remove push bar, push bar spring, and rubber. (refer to step 14~16.)
Step 12
Step 13
Step 14
2-5
2-6 2-6
Step 15
16
Cut three cable tie
from Optical Engine
Module.
Unplug three
Connecting Cords
of DC to DC PWB Unit
Step 16