RADEMACHER RolloSun RSFM 10/16 Einbau- Und Gebrauchsanleitung Seite 50

Connect / disconnect the DuoFern central operating unit with the radio code
Button
9.
10.
11.
OK
12.
13.
OK
14.
M
50
Display
Activate the central operating unit's "connect" or "disconnect" mode.
= connect mode
= disconnect mode
NOTE
If disconnected, the radio tubular motor will be deleted from all of the groups in which it was previously positioned.
After the connection, select the following for the new actuator:
a) a group number
b) a member number
Confirm the member and group numbers.
Then enter a name for the radio tubular motor.
Confirm the name.
The number of logged on devices is again indicated on the display. The radio tubular motor and the DuoFern central operating unit are now
either connected or disconnected.
Back to the DuoFern central operating unit's normal view
Press the key repeatedly.
NOTE
The radio tubular motor can now be configured via the DuoFern central operating unit.
EN