Herunterladen Inhalt Inhalt Diese Seite drucken

Operating Field; Indication Toward Operating Instructions23; Proper Use; Safety Devices - Kärcher HDS 995 M Eco Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für HDS 995 M Eco:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
20 High pressure connection
(Only M / S Eco)
21 High pressure hose
22 Hand spraygun
23 Spray lance
24 High pressure nozzle
25 Cover lock
26 Electronic display for maintenance jobs/
interruptions

Operating field

Figure 2
1 Power switch
2 Temperature controller
3 Fuel indicator lamp
4 Liquid softner indicator lamp
5 Indicator lamp : Detergent 1
6 Indicator lamp : Detergent 2
(only HDS 1295)
7 Indicator lamp: Engine/ Electronics
8 "Ready for use" indicator lamp
9 Manometer
10 Dosage valve for detergent
Indication toward operating
instructions
All subsequent specified position numbers
in this operating instruction are listed in the
device illustration

Proper use

Cleaning of: Machines, Vehicles, Struc-
tures, Tools, Facades, Terraces, Garden-
ing tools, etc.
Danger
Risk of injury! Follow the respective safety
regulations when operating at gas stations
or other dangerous areas.
Please do not let mineral oil contaminat-
ed waste water reach soil, water or the
sewage system. Perform engine cleaning
and bottom cleaning therefore only on
specified places with an oil trap.

Safety Devices

Overflow valve with two pressure
switches
– While reducing the water supply at the
pump head or with the Servopress - reg-
ulation the overflow valve opens and
part of the water flows back to the pump
suck side.
– If the hand-spray gun is closed, so that
the whole water flows back to the pump
suck side, the pressure switch at the
overflow valve shuts down the pump.
– If the hand spray gun is opened, the
pressure switch on the cylinder head
turns the pump back on.
The overflow valve is set by the manufac-
turer and sealed. Setting only by customer
service.
Safety valve
– The safety valve opens, when the over-
flow valve resp. the pressure switch is
broken.
The safety valve is set by the manufacturer
and sealed. Setting only by customer serv-
ice.
Water shortage safeguard
– The water shortage safeguard prevents
the burner to be turned on when there is
water shortage.
– A sieve prevents the contamination of
the safeguard and must be cleaned reg-
ulary.
23
English

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Hds 995 mx ecoHds 1295 s ecoHds 1295 sx eco

Inhaltsverzeichnis