Product Description And Specifications; Intended Use; Product Features - Bosch PCM 8 SD Originalbetriebsanleitung

OBJ_BUCH-2765-001.book Page 26 Tuesday, March 8, 2016 9:56 AM
26 | English
Symbols and their meaning
Observe the dimensions of the saw blade.
The hole diameter must match the tool
spindle without play. Do not use reducers
or adapters.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood. In this, hori-
zontal mitre angles from –48° to +48° as well as vertical bevel
angles from 45° (leftward) to 45° (rightward) are possible.
The capacity of the power tool is designed for sawing hard-
wood and softwood, as well as particle and fibre board.
The power tool is not suitable for cutting aluminium or other
non-ferrous metals or alloys.

Product Features

The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Slide device
2 Transport handle
3 Laser warning label
4 Lock-off button for On/Off switch
5 On/Off switch
6 Handle
7 Blade guard
8 Retracting blade guard
1 609 92A 27V | (8.3.16)
9 Adjustable fence
10 Material stop
To set horizontal mitre an-
11 Fixed fence
gles, the saw table has to
12 Saw-table extension (stationary)
be turned with the lever
pulled until the angle indi-
13 Locking knob for various mitre angles
cator displays the re-
14 Mitre detent lever
quired mitre angle.
15 Tilt protector
The adjustable fence
16 Insert plate
must be pulled outward
17 Mitre angle indicator
when sawing bevel an-
18 Detents for standard mitre angles
gles.
19 Scale for mitre angle
20 Mounting holes
21 Saw table
22 Quick-action clamp
23 Chip deflector
24 Roller
The cutting line can be in-
25 Locking screw for slide device
dicated by the laser beam
26 On/Off switch for laser (cutting line indication)
on either the left or right
27 Chip ejector
of the saw blade.
28 Transport safety-lock
29 Tilt-protector bar
30 Bevel lock lever
31 Holes for quick-action clamp
32 Spindle lock
33 Adjusting screw of depth stop
34 Depth stop
35 Cutting-depth scale
36 Cutting-depth indicator
37 Sliding switch for laser (cutting line indication on
38 Laser beam outlet
39 Right bevel angle indicator
40 Scale for bevel angle
41 Stop screw for left-hand bevel angle range
42 Stop for standard bevel angles 45°, 22.5° and 33.9°
43 Left bevel angle indicator
44 Stop screw for right-hand bevel angle range
45 Stop for standard bevel angle 45° (right)
46 Stop screw for 0° bevel angle
47 Stop for 0° standard bevel angle
48 Clamping lever of the adjustable fence
49 Hex key
50 Clamping lever of the material stop
51 Fastening screw for stationary saw-table extension 12
52 Opening for stationary saw-table extension 12
53 Dust bag
54 Hex socket screw for mounting of saw blade
55 Clamping flange
56 Saw blade
57 Interior clamping flange
left/right of saw blade)
(left)
Bosch Power Tools