Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
*
Do not conduct current measurements with the leads
connected to the V-terminals of the equipment.
*
Check test leads and probes for faulty insulation or bare
wires before connection to the equipment.
*
To avoid electric shock, do not operate this product in wet or
damp conditions. Conduct measuring works only in dry
clothing and rubber shoes, i. e. on isolating mats.
*
Never touch the tips of the test leads or probe.
*
Comply with the warning labels and other info on the
equipment.
*
Always start with the highest measuring range when
measuring unknown values.
*
Do not subject the equipment to direct sunlight or extreme
temperatures, humidity or dampness.
*
Do not subject the equipment to shocks or strong vibrations.
*
Do not operate the equipment near strong magnetic fields
(motors, transformers etc.).
*
Keep hot soldering irons or guns away from the equipment.
*
Allow the equipment to stabilize at room temperature before
taking up measurement (important for exact measurements).
*
Do not input values over the maximum range of each
measurement to avoid damages of the meter.
*
Do not turn the rotary function switch during voltage or
current measurement, otherwise the meter could be
damaged.
*
Use caution when working with voltages above 35V DC or
25V AC. These Voltages pose shock hazard.
Replace the battery as soon as the battery indicator "BAT"
*
appears. With a low battery, the meter might produce false
reading that can lead to electric shock and personal injury.
*
Fetch out the battery when the meter will not be used for
long period.
*
Periodically wipe the cabinet with a damp cloth and mid
detergent. Do not use abrasives or solvents.
*
The meter is suitable for indoor use only
*
Do not operate the meter before the cabinet has been
closed and screwed safely as terminal can carry voltage.
*
Do not store the meter in a place of explosive, inflammable
substances.
*
Do not modify the equipment in any way
-31-
Werbung
Inhaltsverzeichnis
