Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. HOLD Button
Press this button to hold the present reading on the display, and
"H" will appear as an indicator. Press this button again to exit
Data Hold mode, and "H" will disappear
2. Function/Range switch
It can be used to select the desired function and range as will as
to turn on or off the meter. To preserve battery life, set this switch
to the "OFF" position if you don´t use the meter.
3. 10 A Socket
Plug-in connector for the red test lead for DC current
(200mA ~ 10A) measurement.
4. COM-Socket
Plug-in connector for the black test lead for all measurements.
5. „V/ /mA" Socket
Plug-in connector for the red test lead for all measurements
except current measurements above 200 mA.
6. Backlight
Press this button to enable or disable the backlight.
7. LC-Display
The LCD Displays the measurement values with automatic
polarity selection and comma placement. The maximal displayed
count is 1999. If the measured value is above 1999 the over-
range symbol "OL" will be displayed.
8. Non-Contact-Voltage-Detector
-22-
Werbung
Inhaltsverzeichnis
