Assembly - Batavus X4 Betriebsanleitung

•
The equipment has been designed for
home use. The Batavus warranty applies
only to faults and malfunctions in home
use (24 months). Further information on
warranty terms can be obtained from
your national Batavus distributor. Please
note that the warranty terms may vary
from one country to another.
•
Do not attempt any servicing or
adjustments other than those described
in this guide. Everything else must
be left to someone familiar with the
maintenance of electromechanical
equipments and authorised under the
laws of the country in question to carry
out maintenance and repair work.
•
This product has a speed-dependent
braking system.
SAVE THIS INSTRUCTION MANUAL

ASSEMBLY

Start by unpacking the equipment. Two people are
needed for the assembly. Check that you have the
following parts:
Frame
1.
Front support
2.
Rear support
3.
Front frame tube
4.
Handles (2)
5.
Pedal cranks (2)
6.
Footrests (2)
7.
Meter
8.
Stationary handlebar
9.
Transformer
10.
Assembly kit (contents marked with * in the
11.
spare part list): keep the assembly tools, as you may
need them e.g. for adjusting the equipment
If necessary, please contact your dealer with the
model, equipment serial no. and spare part no.
of the missing part. You'll find a spare part list at
the back of this guide. The packaging includes a
silicate bag for absorbing moisture during storage
and transportation. Please dispose of the bag once
you have unpacked the equipment. The directions
left, right, front and back are defined as seen
from the exercising position. Allow at least 100
cm of clearance around the equipment. We also
recommend opening the package and assembling
the product on a protective base.
O W N E R ' S M A N U A L
REAR AND FRONT SUPPORT
Attach the rear support to the frame with two
bolts, washers and locking nuts.
Attach the front support with transportation
wheels to the frame with two bolts, washers and
locking sleeves.
FRONT TUBE
G B
•
B A T AV U S
3