Technical Data - VOLTCRAFT CHARGE MANAGER 2015 Bedienungsanleitung

The three keys serve to display the individual slots and the overall overview of all slots while processing a
programme.
In the event of a power outage or if the charging device is unplugged, the data and settings remain
saved, if the battery is not removed.
ERROR (ERR)
This is displayed if a (non-rechargeable battery) was inserted or if another error occurred.

Technical data

This charging device is to be used exclusively for charging simultaneously up to 4 nickel-cadmium or
nickel-metal-hydride round cell batteries, types Mono, Baby, Mignon and Micro.
Moreover, two 9V compound nickel-cadmium or nickel-metal-hydride batteries can be charged additio-
nally. These batteries may consist of 6, 7 or 8 cells.
Input: ....................................................230V AC, 50Hz
max. 36 W
Output:
compartments 1 through 4: ..................4.5V DC / max. 2A
compartments A and B: ........................16V DC / max. 20mA
Safety class: ........................................II
Protection class: ..................................IP20
Charging Current:
Total charge current: ............................max. 8A
Charge current slots 1-4 ......................max. 2 A
Round cells .......................................... 300mA to max. 2A
9V compound battery ..........................18mA
Discharge current:
Round cells .......................................... max. 850mA
9V compound battery ..........................16mA
max. voltage on the
contacts: ..............................................4.5V or 16 V direct current
37