Change The Engine Oil; Clean And Change Spark; Check The Air Cleaner; Change The Dust Filter - Kärcher KMR 1000 T Betriebsanleitung

English

Change the engine oil

! Suck out the engine oil with oil
change pump 6.491-538 via the oil
filler inlet
! Fill-in engine oil
! Check the engine oil level
Danger of burns!
Do not touch hot parts such as drive
motor and waste gas system.
Clean and change spark plug
! Open unit cover
! Remove the spark plug connector
! Unscrew spark plug
! Clean or change spark plug
! Screw in the spark plug
! Plug in the spark plug connector

Check the air cleaner

Unscrew the sealing cover.
Take off the lid.
KMR 1000 T
! Take out filter cartridge
! Use a new filter cartridge
! Place on and install the sealing
cover

Change the dust filter

♦ Wear a dust protection mask when
working on the filter system.
♦ Observe the safety precautions for
handling fine dust.
Open the dust filter housing and
remove cover.
Loosen both fastening bolts.
Twist the retaining bracket to the left.
Remove the dust filter fastener.
21
Take out the dust filter.
Put a new dust filter on the centring.
Insert the dust filter fastener.
♦ The fastening bolts must be guided
through the retaining bracket.
♦ The drive pins must be inserted in
the dust filter notches.