Initial Commissioning With The Help Of The Installation Wizard - RADEMACHER RolloTron Comfort 1500 Betriebs- Und Montageanleitung

i

14. Initial commissioning with the help of the installation wizard

The wizard automatically guides you through the con-
figuration process for initial commissioning or after a
software reset (see page 107).
With the help of the installation wizard you will be
guided through the first basic settings.
i
Following power failure, the installation wizard
will be started with the resetting of the date
and time.
Restart the installation wizard
As long as the installation wizard is still running, it can
be restarted by pressing the menu button.
Readiness for operation
The RolloTron Swivel Winder Comfort is ready for use as
soon as the installation wizard has finished.
In the main menu you can change your settings at any
time, or add additional settings.
Additional information about configuring the end
points
The end points must be configured for the roller shutters
to stop at the desired upper and lower positions.
It is imperative that both end points are configured,
otherwise malfunctions may occur.
i
If the RolloTron Swivel Winder Comfort is
operated without an end point setting, the
drive will continue to run as long as one of the
two control buttons is actuated.
The automatic functions remain blocked
until the end point setting is configured.
EN
91