Removing The Rollotron Basic Duofern 1200 (E.g. In The Event Of A Move) - RADEMACHER RolloTron Basis DuoFern1200 Original - Betriebs- Und Montageanleitung

i

17. Removing the RolloTron Basic DuoFern 1200 (e.g. in the event of a move)

1.
Remove the cover plate from the lower assembly
screws and setting buttons.
2.
+ +
AUTO
3.
Fully close the roller shutters.
4.
Continue to press and hold the down button.
5.
In this process, pull out the belt as far as possible from
the top of the RolloTron Basic DuoFern 1200.
6.
7.
Subsequently, release the assembly screws and pull
the RolloTron Basic DuoFern 1200 completely out of
the belt box.
88
Erase all settings.
Simultaneously press and hold the
buttons for 4 seconds.
Remove the mains plug from the
socket.
EN