Removing The Rollotron Swivel Winder Comfort (E.g. In The Event Of A Move) - RADEMACHER RolloTron Comfort 1500 Betriebs- Und Montageanleitung

i

18. Removing the RolloTron Swivel Winder Comfort (e.g. in the event of a move)

1.
Remove the cover plate from the setting buttons.
+
2.
M OK
+ +
Erase all settings. Simultaneously press and hold the
buttons for 4 seconds.
3.
Fully close the roller shutters.
4.
Continue to press and hold the down button.
5.
When doing so, pull out the belt as far as possible from
the top of the RolloTron Swivel Winder Comfort.
6.
7.
Press the assembly locking device on the back part and
pull remove the RolloTron Swivel Winder Comfort from
the wall bracket by pulling it downwards.
108
-
+
Remove the mains plug from the
socket and the small appliances plug
from the RolloTron Swivel Winder
Comfort.
Assembly locking device
EN