Intended Use - RADEMACHER RolloTron Comfort 1500 Betriebs- Und Montageanleitung

i
7. Safety instructions
◆ If the running time limit is triggered, then the
RolloTron Swivel Winder Comfort must be left for at
least 12 minutes to cool down.
i
During the cooling period the RolloTron
Swivel Winder Comfort may not be used
and the temperature is displayed for as
long as is necessary.
◆ Full operational availability is re-established after
approx. one hour.
i

7.1 Intended use

Only use the RolloTron Swivel Winder Comfort for open-
ing and closing roller shutters with a permissible belt.
i
Mechanical locks of any kind are not suitable
for automated operation with this device.
According to DIN EN 13659, it is necessary to determine
that the movement conditions for the shutters are main-
tained in accordance with EN 12045.
◆ The displacement must be of at least 40 mm on the
lower edge in the rolled-out position with a force of
150 N in the upwards direction.
◆ In doing so, it must be ensured that the extending
speed of the shutters for the final 0.4 m is less than
0.15 m/s.
Only use original spare parts
from RADEMACHER
◆ By doing so, you avoid risk of malfunctions and
damage to your RolloTron Swivel Winder Comfort.
◆ As the manufacturer, we provide no guarantee for the
use of third-party components and accept no liability
for consequential damage resulting from such.
◆ All repairs to the RolloTron Swivel Winder Comfort
must be undertaken by authorised customer service
personnel.
EN
79