Setting The Automatic Solar Function - RADEMACHER RolloTron Comfort 1500 Betriebs- Und Montageanleitung

16.4 Setting the automatic solar function

The automatic solar function enables brightness-de-
pendent control of the roller shutters in combination
with the light sensor. To do this, the light sensor is secured
to the window pane with a suction cup and then plugged
into the RolloTron Swivel Winder Comfort.
Automatic solar function
Automatic moving up and down of the roller shutter
once a set limit is exceeded. The roller shutter end posi-
tion can be freely selected by changing the light sensor
position.
i
Please note the state of the sun icon on the
standard display.
◆ During the activated automated solar
function, the corresponding icon flashes
in the standard display as soon as sunlight
is detected.
◆ By setting the automatic solar function,
the automatic mode is automatically
switched on.
102
Example installation
The automatic solar function will be terminated
and must be reactivated if required after the fol-
lowing events:
◆ After manual actuation.
◆ After execution of an automatic function.
◆ After the upper end point is reached.
EN