Drawing In And Fastening The Belt - RADEMACHER RolloTron Comfort 1500 Betriebs- Und Montageanleitung

i

11. Drawing in and fastening the belt

1.
First, plug in the small appliances plug into the mains
connection of the RolloTron Swivel Winder Comfort
and subsequently the mains plug into the socket.
There is a risk of injury from the reel.
Never reach into the reel compartment when the motor
is running.
2.
Press the Up button until the fastening hook
are easily accessible in the reel compartment.
i
As no end points have been set yet, the drive
will stop as soon as you release the button.
3.
Remove the mains plug again from the socket.
86
CAUTION!
The small appliances plug
in the mains connection
Reel compartment
Fastening hook
EN