with a programming device and software. Further
resulting functionality and the additional functions pro-
vided in the HomeMatic system combined with other
components are described in the separate Configurati-
on Instructions and in the HomeMatic WebUI Manual.
All current technical documents and updates are provi-
ded under www.homematic.com.
5
General information on radio
operation
The radio transmission is on a non-exclusive trans-
mission path which means that there is a possibility of
interference occurring.
Other interfering sources can be caused by switching
operations, electrical motors or defective electrical
devices.
The range of transmission within buildings can
greatly deviate from open air distances.
Besides the transmitting power and the
reception characteristics of the receiver,
environmental influences such as humidity in
the vicinity and local structures also play an
important role.
36
Hereby eQ-3 AG, declares that this device conforms
with the essential requirements and other relevant
regulations of Directive 1999/5/EC.
The full declaration of conformity is provided under
www.homematic.com.
6
Scope of delivery and installation
6.1 Scope of delivery
The shutter contact mainly consists of two parts:
• Electronics unit
• Magnet
In addition, caps, button cells (2 x LR44), mounting
material and spacer pieces for adaptation to different
types of casement are included in the scope of delive-
ry. In detail, the following pieces are included:
37