Information About This Manual; General System Information About Homematic; General Information About Radio Operation; Function - HomeMatic CCU2 Bedienungsanleitung

1

Information about this manual

Read these instructions carefully before starting to use your Home-
Matic components.
Keep the manual so you can refer to it at a later date if you need to.
If you hand over the device to other persons for use, please hand
over the operating manual as well.
Symbols used:
Attention! This indicates a hazard.
Note. This section contains important additional information.
2 General system information
about HomeMatic
This device is part of the HomeMatic home control system and
works with the bidirectional BidCoS
All devices are supplied with a standard configuration. The function-
ality of the device can be configured using software. The additional
functions that can be made available in this way and the supple-
mentary functions provided by the HomeMatic system when it is
combined with other components are described in the
HomeMatic WebUI Manual.
All current technical documents and updates are provided at
www.homematic.com.
30
wireless protocol.
®
3

General information about radio operation

Radio transmission is performed on a non-exclusive transmission
path, which means that there is a possibility of interference
occurring. Interference can also be caused by switching operations,
electrical motors or defective electrical devices.
The range of transmission within buildings can differ greatly
from that available in the open air. Besides the transmitting
power and the reception characteristics of the receiver,
environmental factors such as humidity in the vicinity have
an important role to play, as do on-site structural/screening
conditions.
eQ-3 AG hereby declares that this device complies with the essen-
tial requirements and other relevant regulations of Directive 1999/5/
EC.
You can find the full declaration of conformity at www.homematic.com.
4

Function

The HomeMatic CCU2 Central Control Unit is the central element of
your HomeMatic system, offering a whole range of control, monito-
ring and configuration options for all the devices in your installation.
The Central Control Unit is easy to operate using the HomeMatic
user interface, WebUI, on your PC, for which you only need a stan-
dard web browser.
The WebUI user interface offers a variety of features for your
HomeMatic installation:
• Configuration and operation of HomeMatic devices
• Querying status information of the HomeMatic devices inside the
31