3.2 Scope of delivery
Push-button assembled:
• Single frame
• Electronics unit with integrated single or dou-
ble rocker
Accessories:
• Adhesive strips for wall mount
• 2 wood-screws 3.0 x 30 mm
• 2 wall anchors 5 mm
• Lithium battery (CR2032)
• Pictogram sticker for rocker buttons
4
General system information
on HomeMatic
This device is a part of the HomeMatic home control
system and works with the bidirectional BidCoS
wireless protocol.
All devices are delivered in a standard configuration.
The functionality of the device can also be confi-
gured with a programming device and software.
The other resulting functionality and the additional
functions that result in the HomeMatic system in
28
cooperation with other components can be found
in the separate configuration instructions or the
HomeMatic System Manual.
All current technical documents and updates are
provided under www.HomeMatic.com.
5
General information on
radio operation
The radio transmission is on a non-exclusive trans-
mission path which means that there is a possibility
of interference occurring.
Other interfering sources can be caused by swit-
ching operations, electrical motors or defective
electrical devices.
Besides the transmitting power and the recepti-
on characteristics of the receiver, environmental
®
influences such as humidity in the vicinity and local
structures also play an important role.
Hereby, eQ-3 Entwicklung GmbH, declares that this
device conforms with the essential requirements
and other installation site as desired conforming
The range of transmission within buildings
can greatly deviate from open air distances.
29