Selecting Outdoor Sensor; Comfort Indicator; S) Backlighting; T) Reset - Conrad Profi Bedienungsanleitung

q) Selecting Outdoor Sensor
If you want to use several outdoor sensors at the weather station (one is enclosed with the delivery,
up to two others can be ordered as accessories), you can switch between the outdoor sensors
with the button „CHANNEL" (B10).
CH1 Data measured by outdoor sensor 1
CH2 Data measured by outdoor sensor 2
CH3
Data measured by outdoor sensor 3
The measured data of the outdoor sensors are displayed in sequence for a few seconds
each.
r) Comfort Indicator
The bar chart (A18) serves to estimate the best room climate. If the black bar is within the
green comfort range („COMF"), the room climate (combination of indoor temperature and indoor
humidity) is perfect.
In the blue range, the room climate is too cool, in the red one it is too hot/humid.

s) Backlighting

Briefly push the button „SNOOZE/LIGHT" (B1) to activate the backlighting for a few seconds.

t) Reset

• If only crazy characters appear in the weather station's display, briefly push the button „RESET"
(B9) e.g. with a toothpick. Alternatively, remove the batteries for a few seconds and re-insert
them.
All settings and measured values are lost.
• If only crazy characters appear in the outdoor sensor's display, open the battery compartment of
the outdoor sensor and briefly push the button „RESET" (D6) e.g. with a toothpick. Alternatively,
remove the batteries for a few seconds and re-insert them.
65