6.2 Supported operating systems
INFORMATION
Please also note the operating systems supported by the Ottobock software.
•
Microsoft Windows XP, 32 Bit
•
Microsoft Windows Vista, 32 Bit
•
Microsoft Windows 7, 32 Bit
•
Microsoft Windows 7, 64 Bit
•
Microsoft Windows 8, 32 Bit
•
Microsoft Windows 8, 64 Bit
•
Microsoft Windows 10, 32 Bit
•
Microsoft Windows 10, 64 Bit
7 Driver software installation
7.1 Installation in Windows XP
Close all open applications.
1) Insert the enclosed CD into the CD or DVD drive.
2) Connect the BionicLink PC plug to the USB port on the PC.
→ The green LED on the 60X5 BionicLink PC is illuminated.
→ Windows XP recognises the 60X5 BionicLink PC automatically and launches the installa
tion wizard.
3) In the dialogue window for establishing the connection to Windows Update, select the option
No, not this time and click the Next button.
4) In the dialogue window for the driver search, select the automatic driver search and click the
Next button.
INFORMATION: If the automatic driver search does not work fully, enter the drive let
ter of the CD/DVD drive manually.
5) Follow the next instructions of the installation wizard.
INFORMATION: If the information window that references the failed Windows logo
testing appears, the installation can still be continued regardless. To do so, click the
corresponding button.
→ The driver is installed in two steps (first "USB Controller" and then "COM-Port"). An addition
al installation process then starts after the installation of the "USB Controller", as described in
steps 3 to 5.
INFORMATION: To ensure the correct installation of the driver, the second installation
process must not be cancelled.
7.2 Installation in Windows Vista and Windows 7
Close all open applications.
1) Insert the enclosed CD into the CD or DVD drive.
2) In the dialogue window, select the option Run Setup.exe.
3) Follow the next instructions of the installation wizard.
INFORMATION: If the information window that references a driver software publisher
that cannot be verified appears, the installation can still be continued regardless. To
do so, click the corresponding option in the dialogue window.
4) Follow the next instructions of the installation wizard.
5) When the dialogue window informing you that the driver has been installed successfully
appears, click the Finish button.
6) Connect the BionicLink PC plug to the USB socket on the computer.
12