Specifications - WIKA CPG1000 Betriebsanleitung

3. Specifications

3. Specifications
Sensor technology
GB
Measuring range
Overpressure limit
Burst pressure
Resolution
Measuring range
Overpressure limit
Burst pressure
Resolution
Measuring range
Overpressure limit
Burst pressure
Resolution
Measuring range
Overpressure limit
Burst pressure
Resolution
Accuracy
Compensated temperature
range
Temperature coefficients
Type of pressure
Pressure connection
Pressure medium
1) Only use the measuring ranges marked in this way with clean non-corrosive gases.
2) For measuring instruments with a maximum measuring range of up to 2 bar, operation in the vacuum measuring range is limited
to -350 mbar. (Measuring ranges -1 ... +1 bar and -1 ... +2 bar are excluded.) Measuring ranges ≥ 7 bar can be loaded with a full
vacuum.
3) Adapter not included in delivery for North America.
12
Приборы & Автоматика +7 (495) 712-3209, 712-3218, 988-0959 www.k-avtomatika.ru 9880959@mail.ru
1)
mbar 0 ... 70
mbar 200
mbar 350
mbar 0.001
bar 0 ... 1 0 ... 2
bar 4 4
bar 6 6
bar 0.0001
bar 0 ... 20 0 ... 35
bar 42 70
bar 140 140
bar 0.001
bar abs. 0 ... 1 0 ... 2
bar abs. 4 4
bar abs. 35 35
bar abs. 0.0001
0.05 % FS
(0.1 % FS for measuring ranges 0 ... 70 mbar, -1 ... +1 bar and -1 ... +2 bar)
(0.25 % FS for vacuum measuring ranges with instruments from 7 bar to a max.
2)
35 bar)
0 ... 50 °C
0.005 % of the span/°C outside of 0 ... 50 °C
relative pressure, absolute pressure (up to 20 bar abs) and vacuum measuring
ranges
¼ NPT male (incl. ¼ NPT female to G ½ male adapter)
all liquids and gases compatible with 316 stainless steel
WIKA operating instructions model CPG1000
1) 1)
-1 ... +1 -1 ... +2 0 ... 7
4 4 14
6 6 70
0 ... 70 0 ... 140 0 ... 200 0 ... 350 0 ... 700
140 210 420
700 700 700
0.01
0 ... 7 0 ... 20
14 42
70 140
0.001
3)
700 1,100
700 1,100
1)