WIKA CPG1000 Betriebsanleitung Seite 13

3. Specifications
Base instrument
Indicator
Display
Pressure units
Functions
Measuring rate
Memory
4)
Data logger
Material
Wetted parts
Case
Voltage supply
Power supply
Battery life
Battery status indication
Permissible ambient conditions
Operating temperature
Medium temperature
Storage temperature
Relative humidity
Communication
Interface
Case
Dimensions
Ingress protection
Weight
WIKA operating instructions model CPG1000
Приборы & Автоматика +7 (495) 712-3209, 712-3218, 988-0959 www.k-avtomatika.ru 9880959@mail.ru
5 1/2 digit display, character size 16.53 mm (0.65")
20 segment bargraph, 0 ... 100 %
psi, bar, mbar, Kg/cm², inH
60 °F), cmH O (4 °C and 20 °C), mH
2
mmHg, TORR, mSW, ft SW, user-defined unit
0.5/sec. to 10/sec. selectable
MIN/MAX, integrated data logger
Cyclic logger: automatic recording of up to 8,500 values;
Cycle time: selectable from 1 ... 3,600 sec. in the following steps
1 sec., 2 sec., 5 sec., 10 sec., 30 sec., 1 min, 2 min, 5 min, 10 min, 30 min and
1 h
stainless steel 316
stainless steel
3 x 1.5 V AA alkaline batteries
approx. 1,500 h without backlighting
approx. 2,000 h at lower measuring rate
Icon in display for low battery level
-10 ... +55 °C
-10 ... +55 °C (lower temperature limit above the freezing point of the medium)
-20 ... +70
< 95 % r.H. (non-condensing)
USB, RS-232
111 x 127 x 38 mm
IP 65
approx. 455 g
O (4 °C, 20 °C or 60 °F), ft H
2
O (4 °C and 20 °C), kPa, MPa, inHg,
2
O (4 °C, 20 °C or
2
13
GB