Dismounting, Return And Disposal - WIKA CPG1000 Betriebsanleitung

9. Dismounting, return and disposal

9. Dismounting, return and disposal
WARNING!
Residual media on the dismounted precision digital pressure gauge can
result in a risk to persons, the environment and equipment. Take sufficient
precautionary measures.
9.1 Dismounting
Only disconnect the test and calibration installations once the system has been depres-
surised!
9.2 Return
WARNING!
Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of hazardous
substances (acids, bases, solutions etc.).
When returning the instrument, use the original packaging or a suitable transport package.
To avoid damage:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument, along with the shock-absorbent material, in the packaging.
Place shock-absorbent material evenly on all sides of the transport packaging.
3. If possible, place a bag, containing a desiccant, inside the packaging.
4. Label the shipment as transport of a highly sensitive measuring instrument.
Information on returns can be found under the heading "Service" on our
local website.
9.3 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an environmentally compat-
ible way and in accordance with the country-specific waste disposal regulations.
This marking on the instruments indicates that they must not be disposed
of in domestic waste. The disposal is carried out by return to the manufac-
turer or by the corresponding municipal authorities (see EU directive
2002/96/EC).
WIKA operating instructions model CPG1000
Приборы & Автоматика +7 (495) 712-3209, 712-3218, 988-0959 www.k-avtomatika.ru 9880959@mail.ru
GB
29