General Information - WIKA CPG1000 Betriebsanleitung

1. General information

1. General information
The precision digital pressure gauge model CPG1000 described in the operating
■
GB
instructions has been manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental criteria during produc-
tion. Our management systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the instrument.
■
Working safely requires that all safety instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and general safety regula-
■
tions for the instrument's range of use.
The operating instructions are part of the product and must be kept in the immediate
■
vicinity of the instrument and readily accessible to skilled personnel at any time.
Skilled personnel must have carefully read and understood the operating instructions
■
prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused by using the
■
product contrary to its intended use, non-compliance with these operating instructions,
assignment of insufficiently qualified skilled personnel or unauthorised modifications to
the instrument.
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Factory calibrations / DKD/DAkkS calibrations are carried out in accordance with inter-
■
national standards.
Further information:
■
- Internet address:
- Relevant data sheet:
- Application consultant:
4
Приборы & Автоматика +7 (495) 712-3209, 712-3218, 988-0959 www.k-avtomatika.ru 9880959@mail.ru
www.wika.de / www.wika.com
CT 10.01
Tel.: (+49) 9372/132-9986
Fax: (+49) 9372/132-217
E-Mail: testequip@wika.de
WIKA operating instructions model CPG1000