AsViva RA17 Benutzerhandbuch Seite 35

PROGRAM
RACE
0.1 ~99.9±0.1
5 ~ 90 ±1SPM
USER
55%、75%、90%、IN
H.R.C.
(TARGET)
SCAN
TIME/500M 0:00 ~ 99:59
STROKES 0 ~ 9999
TOTAL
0 ~ 9999
2. OPERATION DESCRIPTION
STROKES
1. Make sure plug in right power adaptor (6V 1000 mA), and regarding with different
country system pin, and then powering on: BI with long tone for 1 second together with
LCD full display for 2 seconds,
2. Powering on (or hold RESET key for 2 seconds) full display. Press START/STOP key
entering MANUAL control mode directly and start exercise..
3. USER display in dot matrix to choose (U1-U4), you can turning knob UP +, DOWN －for
choice USER number and input USER data after pressing ENTER for confirmation.
Press ENTER-key for confirmation if everything, it will step to upper key functions, all
blink and wait for USER, turn KNOB UP +, DOWN －KNOB for choice, it will jump back
to UX(0-4) choice). ※ USER : U0 ~U4 ( U1 ~ U4 memorized user data; U0- No memory
of data and workout value)
4. ENTER "CONTROL MODE"- MANUAL / PROGRAMS / USERS / H.R.C./ RACE
4-8 Manual
LOAD1 and display in dot matrix after pressing ENTER key for confirmation, now turn
KNOB UP +, DOWN －knob for adjusting LOAD value and ENTER key for confirmation,
turn UP +, DOWN －KNOB again for setting, Press START and begin to exercise after
finish all functions' setting (I.e. TIME、DISTANCE、CALORIES、HEART RATE).
4-9 PROGRAM
If choose Program diagram P1-P12 in dot matrix after pressing ENTER -key to program.
After select ideal program diagram to turn KNOB UP +, DOWN －KNOB for adjusting
1. P1～P12，12 fixed diagram.
2. Every time you choose one PROGRAM, correspondent diagram
will display on the center of dot matrix..
3.Diagram choice by turning UP、DOWN-Knob，and ENTER
P1~P12
for confirmation.
4.After selecting program, blinking diagram will show in dot matrix,
turning UP/DOWN-KNOB for adjusting LEVEL and ENTER
KEY for TIME setting，TIME symbol blinks.
USER can set SPM of PC as well as distance for race.
1.USER can set PROGRAM diagram by himself
KM(ML)
2.press ENTER
U1~U4
UP、DOWN Knob for adjusting LOAD value.
3. One saved value each.
1. Choice your want H.R.: 55%、75%、90%、IND.
2. (55%、75%、90%、IND) symbol blink during setting, constant
D
light after choosing and then step to time setting, TIME symbol
blinks.
1.TIME&TIME/500M。
2. & CALORIES switch to display every 6 seconds.
3. DISTANCE switch to display every 6 seconds.
4. STROKES &TOTAL STRORES switch to display every 6
seconds.
STROKES ALARM one
KEY for line setting and
-
35 / 42