Where To Get Help; Help With Technical Questions - Siemens 6GK1141- 1AA00 Installationsanleitung

Installation Instructions CP 1411
5

Where to Get Help

5.1

Help with Technical Questions

Documentation
Who to Contact
Courses and
Further Support
44
Information about using this product can be found in the following
sources:
• In the corresponding paper documentation
• In the online help (F1 key)
• In the text and PDF files on the SIMATIC NET CD
• In the following manuals of the S7-400 H programmable controller
− Fault-Tolerant Systems
− Configuring Hardware and Communication Connections with
STEP 7 V5.0
− Programming with STEP 7 V5.0
If you have technical questions about using the software and your
problem is not dealt with in the documentation or in the integrated
help system, please contact your Siemens representative or dealer.
The addresses are listed in the following:
• In our catalog IK 10
• On the Internet (http://www.ad.siemens.de/net)
• in the "README.TXT" in the main folder of the SIMATIC NET CD
The H/F Competence Center in Nuremberg offers a special workshop
on the topic of fault-tolerant SIMATIC S7 programmable controllers.
The H/F Competence Center also supports you during configuration,
when putting your system into operation and if you have problems on
site.
For more detailed information, contact:
• Phone:
+49 - 911 - 895 - 4759
(within Germany 0911 - 895 - 4759)
• Fax: +49 - 911 - 895 - 4519
(within Germany 0911 - 895 - 4519)
Installationsanleitung CP 1411
C79000-Z8974-C24-05