Description Of The Cp 1411; General Description; Network Attachments - Siemens 6GK1141- 1AA00 Installationsanleitung

Installation Instructions CP 1411
1

Description of the CP 1411

1.1

General Description

Hardware
Requirements
Ethernet
Connections
LED Display
1.2

Network Attachments

15-pin sub D
female connector
Switching between
AUI and ITP
RJ-45 Female
Connector
Caution in an
Industrial
Environment
30
The CP 1411 is a card for IBM-AT compatible PCs or PGs and re-
quires a 16-bit ISA slot for operation.
The CP 1411 is intended for operation in networks handling communi-
cation using the CSMA/CD medium access technique (Ethernet).
The CP 1411 is connected to the LAN (Local Area Network) using one
of the two female connectors on the front panel of the CP.
To indicate module activity, the CP 1411 has an LED on its front panel
that lights up when data is received.
The 15-pin sub-D female connector with its slide locking mechanism is
intended both for connection of AUI transceiver cables (AUI Attach-
ment Unit Interface) as well as ITP cables (ITP - Industrial Twisted
Pair).
If you use Siemens ITP cables, the module switches over between AUI
and ITP automatically.
The RJ-45 connector is designed for the attachment of TP cables
(TP - Twisted Pair).
In an industrial environment, only the AUI or ITP connectors should be
used due to their superior noise immunity.
Note that it is not possible to use both connectors at the same
time.
Installationsanleitung CP 1411
C79000-Z8974-C24-05