Technical Data; Pid-Temperature Control; Machine Installation; Preparation For Installation - Profitec Pro 300 Bedienungsanleitung

3.2 Technical data

Voltages:
Power:
Water tank:
Measurements:
Measurements with portafilter:
Weight:

1.3 PID-Temperature Control

The function of a PID-Temperature Control is to regulate the temperature of the coffee boiler. The
temperature of the boiler is programmable and controlable. You have the possibility to extract coffee at
varying temperatures. The temperature, or rather the pressure of the steam boiler, is regulated by the
pressure switch and is not adjustable from the outside.
PID stands for "proportional-integral-derivative". The PID-control displays the temperature of the coffeboiler.
Temperature coffee boiler (here 92°C)
4

MACHINE INSTALLATION

The installation is to be carried out exclusively by qualified specialists, according to the
following instructions and in compliance with valid laws and local regulations.

4.1 Preparation for installation

Place the machine on an even and stable surface.
Never place the machine on hot surfaces.
Place the machine on a water-proof surface, as the machine may at some point leak
water.

4.2 Electrical connection

Make sure that the local main voltage supply corresponds to the information given on the
type plate on the front panel of the espresso machine.
Plug the machine into a grounded socket only and do not leave it unattended.
Do not roll or bend the power cord.
Do not use an extension cord/ do not use a multiple socket.
Bedienungsanleitung PRO300 / Instruction manual PRO300
EU: 230 V
UK: 230 V
New Zealand: 240 V
Australia: 240 V
US: 115 V
Japan: 100 V
2200 W
ca. 3.0 l
W x D x H / 255 mm x 415 mm x 385 mm
W x D x H / 255 mm x 475 mm x 385 mm
18 kg
18