Lnb/Cable Test - Kathrein MSK 115 Betriebsanleitung

LOG WITH "LOG AS"
Before using the Log function, you must record the selected satellite. Make sure that the reception level is
the best it can be. The "Log as 000xx" function must be checked. Pressing the RIGHT button at this point
now saves and numbers the level of the selected satellite; the Save number is incremented by 1 each time
a further Save is added. Note the Save number on a piece of paper; you will need it again should you wish
to download the log information from the measuring instrument.
The logging software for extracting the saved values can be downloaded from the Kathrein download page
for measuring instruments. The software also includes user manuals for printing out in PDF format.

LNB/CABLE TEST

The "LNB/cable test" is a quick function for searching for possible faults; it can be used to indicate whether
any problems are present.
Note:
The functions listed above are intended only for indicative purposes.
OPERATING MENU
The test results appear in a few seconds, as shown in the table
below.
17