Technical Appendix; Features - Kathrein MSK 115 Betriebsanleitung

FEATURES

Measuring range: 950-2150 MHz
Input level range: 44-84 dBµV
Input data rate: 1-45 MSymbol/s
Level and BER measurement
BER bar graph display in linear or logarithmic format
QPSK constellation diagram
Display of the frequency spectrum with selectable span (60, 120, 240, 480, 960 and 1200 MHz)
Display of carrier-to-noise (C/N) ratio and VBER
Acoustic and optical signal quality and signal strength display
Quick test for LNB current
Level indication either in dBµV or linear in 256 increments
64 transponders or 32 satellites can be set
User-defi ned transponder setting
Easy adjustment and change of satellite parameters through software updates
Facility to save measurement results in the instrument
Facility for transferring measurement results to a PC by USB cable
Power supply via built-in battery
Battery capacity for more than three hours continuous operation
Battery charging with external 240 V charger or external 12 V DC supply
LNB supply voltage: 13/18 V, max. 500 mA
Control signal: DiSEqC
Hotbird 13.0°
RF input: 75 Ohm, F plug, with loop-through output
USB interface for software updates
Supplied with a case, RF cable with F plug, mains cable, 12 V connection cable and USB computer
connection cable
Dimensions W x H x D (mm): 207 x 67 x 137
Weight (kg): 1.5
22

TECHNICAL APPENDIX

TM 1.0, 22 kHz, SCR single cable system control signals for ASTRA 19.2° and