About This Manual; Applicability; Users Of This Manual; Description Of Symbols - Steca StecaGrid 8000 3ph Installations- Und Bedienungsanleitung

The solar power system feeds the alternating current via an additional feed-in me-
ter (used for feed-in tariff) directly to the grid system of the grid system operator
and is then available to all consumers connected to the grid. The energy used by
the electricity consumers is then billed as normal using the existing consumption
meter.
Among other components, the inverter contains a central control unit and an in-
ternal data logger. The inverter can be optionally extended with a StecaGrid Vision
display unit. See www.stecasolar.com for further information about accessories.
Your installer can, of course, also give you more information about the options
and accessories that are available.
In the following technical documentation, the installer and user are given a de-
scription of the technical features that are necessary for the installation, function,
operation and use of the inverter.
1

About this manual

1.1 Applicability

This manual describes the installation, commissioning, function, operation, main-
tenance and deinstallation of the inverter for grid-connected photovoltaic systems.
When installing the remaining components, e.g. the photovoltaic modules, the
DC or AC wiring and other accessories, be sure to observe the appropriate instal-
lation instructions provided by each manufacturer.

1.2 Users of this manual

Installation, commissioning, operation, maintenance and deinstallation of the in-
verter may only be done by qualified electricians in accordance with the applica-
ble on-site installation regulations. The qualified electricians must be familiar with
this operating manual and follow the instructions it contains.
Qualified electricians are persons professionally qualified, certified and authorised
to perform the following work:
• Installation of electrical equipment
• Production and connection of data communication lines
• Production and connection of mains grid power supply lines
The end user may only perform operating functions.

1.3 Description of symbols

1.3.1 Symbols used in this manual and on the device

Symbol Description
General danger symbol
Electrical voltage
Hot surface
Note
Read the manual before using the product.
30
EN
Location
Manual
Manual,
device
Manual,
device
Manual
Device
737.096 | 11.37