Safety Instructions; A) General - Reely Soarstar Bedienungsanleitung

For display reasons, the decals as well as the small parts, such as screws, spinner, rudder horns etc. are not illustrated. See the package or these
operating instructions to exactly see what is included in delivery.
You can see the exact position of the decals on the package, or apply the decals according to pictures or your own preferences. See "Applying the
decals" at the end of these instructions.
The following components not included in delivery are required for assembly and operation:
Assembly:
Soldering gun, box cutter, scissors, mini drill with different bits, screwdriver, threadlocker, foil pen, 5-minute epoxy glue, if needed thixotropic agent (micro
balloons or cotton flocks) to thicken the glue, wood glue, sandpaper, Velcro fastener and double-sided adhesive tape.
Caution!
Observe the safety notes of the respective manufacturer when using glues and work with glues in well-ventilated rooms only.
Operation:
To operate the model plane, you require a suitable remote control system with at least 3 channels, 2 servos with a least 10 Ncm controlling torque, a 18A/12V
speed controller with BEC, a suitable 2-cell LiPo flight battery with approx. 1300 mAh, and the corresponding connectors for "motor/wing" and "speed controller/
battery".
See our catalogues or our website at www.conrad.com for tried and tested accessories.


6. Safety instructions

The guarantee/warranty will be void if damage is incurred resulting from non-compliance with the operating instructions. We assume no
liability for any consequential damage!
Nor do we assume liability for damage to property or personal injury caused by improper use or the failure to observe the safety
instructions! In such cases the warranty/guarantee is voided.
Normal wear and tear and accident and crash damages (e.g. broken propeller or other broken parts) are also excluded from the guarantee and
warranty.
Dear Customer,
These safety instructions are not only for the protection of the product but also for your own safety and the safety of others. This is why you should
read this section very carefully before using the product!

a) General

Caution, important note!
Operating the model can lead to material and/or personal damage. Therefore, make sure that you are properly insured when using the model, e.g.
by taking out private liability insurance. If you already have insurance, enquire whether the operation of the model is covered before operating it.
Please note: In some EU countries, you are required to have insurance for any flying models!
• The unauthorized conversion and/or modification of the product or of its components is inadmissible for safety and approval reasons (CE).
• The product is not a toy. It is not suitable for children under 14 years of age.
• The product must not become damp or wet.
• If you do not have sufficient knowledge as to how to deal with remote-controlled models, please seek the advice of an experienced model maker or a model
making club.
• Do not leave packaging material lying around unattended. It can become a dangerous toy for children.
• Should any questions arise that are not answered in the operating instructions, contact our technical support (see chapter 1 for contact information) or another
expert.
21