Hedge Trimmer Safety Warnings; Operation - FLORABEST FHT 600 E3 Originalbetriebsanleitung

Use the power tool, accessories
•
and tool bits etc. in accordance
with these instructions, taking
into account the working condi-
tions and the work to be per-
formed. Use of the power tool for op-
erations different from those intended
could result in a hazardous situation.
• Carefully inspect the area to be cut
and remove all wires or other foreign
bodies.
Service
Have your power tool serviced
•
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
Hedge trimmer safety
warnings
Keep all parts of the body away
•
from the cutter blade. Do not
remove cut material or hold ma-
terial to be cut when blades are
moving. Make sure the switch is
off when clearing jammed ma-
terial. A moment of inattention while
operating the hedge trimmer may result
in serious personal injury.
Carry the hedge trimmer by the
•
handle with the cutter blade
stopped. When transporting
or storing the hedge trimmer
always fit the cutting device
cover. Proper handling of the hedge
trimmer will reduce possible personal
injury from the cutter blades.
Hold the power tool only on the
•
insulated grip surfaces, as the
cutting blade can come into con-
tact with concealed power lines
or its own mains cable. Contact
between the cutting blade and a live
cable may render metallic components
live and result in an electric shock.
Keep cable away from cutting
•
area. During operation the cable may
be hidden in shrubs and can be acci-
dentally cut by the blade.
Before the work, search the
•
hedge for concealed objects, e.g.
cable etc.
Hold the hedge trimmer correct-
•
ly, e.g. with both hands on the
handles, if there are two han-
dles. Loss of control of the equipment
may result in injuries.
Wear suitable clothing and work
•
clothes when working with
the equipment. Do not hold the
equipment by the cutting blade
or lift it on the cutting blade. Con-
tact with the cutting blade can cause
injuries.
• Connect the appliance to a power sock-
et with a residual current circuit breaker
of rated residual current no more than
30 mA.

Operation

Do not use the equipment
without the hand guard. Wear
suitable clothing and work
gloves when working with
the equipment. Wear eye and
ear protection. Ensure that the
equipment is functional before
each use.
There is a risk of personal in-
jury and property damage!
The On/Off switch and the
safety switch must not be
held closed. They must switch
off the motor when on is
GB IE NI
9