General Power Tool Safety Warnings; Work Area Safety - Parkside PDFW 120 A1 Originalbetriebsanleitung

Explanation of the symbols used on the
appliance:
■ Read all safety warnings
and all instructions!
■ Read all safety warnings
and all instructions!
■
Wear safety goggles!
■
Wear hearing protection!
■
Wear protective gloves!
Noise emission value:
Noise measurement value determined in accord-
ance with EN ISO 4871. The rated noise level of
the power tool is typically:
Sound pressure level:
Uncertainty:
Sound power level:
Uncertainty:
Wear hearing protection!
Vibration emission value:
Total vibration value (vector total of three directions)
determined in accordance with EN 61029:
Vibration emission value ah ≤ 2.5 m/s2
Uncertainty Kh = 1.5 m/s2
NOTE
► The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and
can be used for equipment comparisons. The
specified vibration emission value can also
be used to make an initial exposure estimate.
GB │ IE │ NI │ CY
■ 4
│
L = 74.7 dB (A)
pA
K = 3 dB
pA
L = 87.7 dB (A)
WA
K = 3 dB
WA
WARNING!
► The vibration level varies in accordance with
the use of the power tool and may be higher
than the value specified in these instructions
in some cases. Regular use of the power tool
in this way may cause the user to underesti-
mate the vibration. To estimate the vibration
load during a specific working period ac-
curately, also take into account periods dur-
ing which the appliance is switched off (or
running, but not being used). This can signifi-
cantly reduce the vibration load over the total
working period.
General Power
Tool Safety Warnings
WARNING!
►
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future
reference!
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
PDFW 120 A1